+ Reply to Thread
Results 1 to 2 of 2

Thread: looking for spindles for delta RS-15 shaper

  1. #1
    Join Date
    Jan 2012
    Location
    st.louis mo
    Posts
    1

    Default looking for spindles for delta RS-15 shaper

    need spindle for delta/invicta RS-15 shaper Model#43-780. I think theese are the pn#'s inv85tu-ko41-0 (3/4"), and inv85tu-k036-0 (1-1/4"). Any help would be appreciated.

  2. #2
    Join Date
    Mar 2009
    Location
    The dotcom Cavern, SLC
    Posts
    210

    Default Delta Shaper Spindle

    Kelly,
    Although I was able to find the item numbers for those old spindles you're looking for (the 3/4" spindle is item number 43-783 and the 1-1/4" spindle is item number 43-787), I was unable to locate any actual spindles for the machine. From everything I can tell, they are simply no longer available through traditional channels. By this, I simply mean that I don't think you'll be able to procure them from the manufacturer or from one of their vendors. You may, however, be able to find them through eBay, Craigslist, local classified listings, or some other independent seller.
    I'm sorry I didn't have a better answer for you today, but I hope you'll visit us again in the future. Good luck with that shaper and please let me know if you have any additional questions or if I can help with anything else.
    Over and Out..
    Mallory, Head Writer, Parts Extraordinaire
    toolsandmachinery.com

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts